UPC 799916133628

• Tan drying two-part urethane adhesive sets in 15 minutes and cures in 30 minutes
• Great for filling dents, bumpers, trim, polypropylene and polyethylene plastics, fiberglass and more
• Tensile strength of 3770 PSI for a strong, permanent bond
• No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
• J-B Weld is proudly made in the USA

J-B Weld Plastic Bonder SyringePlastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.Use on:

Automotive

Brick

Ceramic

Concrete

Epoxy and Adhesives

Fiberglass

Plastic/Composite/PVC

Wood

And more

Instructions1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.J-B Weld is proudly made in the USA