Scannable Barcode for UPC 810948015604
Sellers
| Marketplace | Price | Updated |
|---|---|---|
| $54.99 | 07/15/2020 21:04:35 GMT - Details |
Recently Searched
UPC 045242504435
Milwaukee Electric Tools 2736-21HD Table Saw Tool
Best Price: $649.00
View Product
UPC 817918022532
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Best Price: $84.99
View Product
Attributes
| Attribute | Value |
|---|---|
| Binding | Misc. |
| Brand | Fulton |
| EAN | 0810948015604 |
| Manufacturer | Fulton |
| MPN | 1250 |
| UPC | 810948015604 |
Description
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
- The .200" thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
- To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two " x " slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8" from the base of the miter gauge head.
- The head is mounted to a solid steel miter bar that measure 18" in length and is .353" thick by .730" wide. Standard miter slots are 3/4" x 3/8" with a 1/8" T" slot running the length on the bottom of the slot.
- The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8" in diameter and is just shy of 1/8" to fit into to the T" slot to prevent accidental lifting when feeding your stock through. If your saw does not have a T" slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.