UPC 817050270624

• Manual-ranging digital multimeter measures voltage, current, temperature, frequency, and capacitance, and performs diode and continuity tests
• Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
• K-type thermocouple has a temperature range of -35 to +750 degrees C/-30 to +1400 degrees F
• Magnetic hanger and built-in stand free hands for managing test leads
• Meets IEC safety standard 61010-1 and is certified for Category II installations up to 1000V, Category III installations up to 600V, Class II, Pollution Degree 2 for indoor use

The B & K Precision 2706B digital multimeter is an average-sensing, manual-ranging meter that measures current, voltage, temperature, frequency, and capacitance, and performs diode and continuity tests in electrical applications. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit's diodes. Temperature measurements are taken using a K-type thermocouple . The LCD is backlit for readability in low light. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The LCD has a 2, 000-count resolution, meaning it can display up to 1, 999 units before the operating range needs to be changed. It meets International Electrotechnical Commission safety standard 61010 and is certified for Category II installations up to 1000V, which covers large household appliances and devices connected to a fixed power supply , Category III installations up to 600V, which covers items used with enclosed building circuit installations , and Pollution Degree 2 for indoor use. The meter includes a set of detachable test leads, a K-type thermocouple, a spare fuse, a 9V battery, a magnetic hanger, and instructions.Maximum alternating current input200 milliamps Maximum direct current input200mAMaximum AC voltage input750VMaximum DC voltage input1000VMaximum resistance detected40 megaohmsMaximum capacitance20 microfaradsMaximum frequency range40 kHzOther testsDiode and continuityPower supply9V battery Safety ratingsEuropean Conformity ; International Electrotechnical Commission safety standard 61010-1; European Union EMC EN61326WeightApproximately 10oz./285g Dimensions165 x 78 x 42.5mm/6.5 x 3.1 x 1.7 inches , H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.B & K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization standard 9001:2008 and is compliant with Restriction of Hazardous Substances and waste electronic and electrical equipment directives. B & K Precision 2706B digital multimeterSet of test leadsSpare fuse9V battery K-type thermocoupleMagnetic hangerInstructions