UPC 841558263277
Barcode for Audio Control ACR3 Remote for Audio Control Processors
Scannable Barcode for UPC 841558263277
Sellers
Marketplace | Price | Updated |
---|---|---|
$39.95 | 02/22/2022 01:13:25 GMT - Details | |
$39.99 | 02/22/2022 01:13:38 GMT |
Recently Searched
UPC 636946956288
LEIGESAUDIO Car Stereo Hight to Low Converter, 2 Channel Line Output Convertor with Remote Turn On RCA Car Line Converter Output Adapter - Black
Best Price: $16.99
View Product
UPC 784644312643
AudioPipe XV-BXP-SUB 15V Car Audio System Digital Sound Equalizer Epicenter Enhancer Restoration Signal Processor Bass Booster w/ Remote Knob, Black
Best Price: $42.94
View Product
Attributes
Attribute | Value |
---|---|
Binding | Electronics |
Brand | AudioControl |
EAN | 0841558263277 |
Manufacturer | AudioControl |
Model | ACR3 |
MPN | ACR3 |
UPC | 841558263277 |
Description
- This wired remote allows you to easily change the input source, adjust the auxiliary input volume, and adjust the output level of channel 4 of the AudiControl LC8i. The remote is designed to be dash mounted, within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed and the knob and LED can be custom mounted through the dash. Pressing the knob engages the auxiliary input.
- Compatible with: LC8i 8-channel line converter, DQ-61 factory sound processor, DQDX digital signal processor, D-4.800 4-channel amp and DSP, D-6.1200 6-channel amp and DSP, DM-608, DM81 digital signal processors, & The Epicenter Amplifiers.
- Mounting Options: The dash control may be mounted under the dash using its own bracket or through a custom hold in the dash. It should be within reach of the driver and in a spot where the LED is plainly visible
- Bracket Installation: The dash control mounts with two screws, which attach to the underside of the dashboard. Slide under the dash and place the dash control in its mounting position, mark the two mounting holes, drill pilot holes, and secure with two screws.
- Custom Installation: For that custom, finished look, the dash control can be flush mounted directly on the dash-board . Disassemble the dash control from the mounting bracket. Start by pushing the LED from its holder followed by removing the circuit board and rotary control from the bracket. Drill a 9/32" hole in the dashboard for the control along with a 1/8" hole for the lock tab and a 13/54" hold for the LED holder. Reassemble the dash control components on the dashboard.
Price Disclaimer
Product prices are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on amazon.com, amazonsupply.com, or myhabit.com at the time of purchase will apply to the purchase of this product.