UPC 841992108738

• Power Output: 80 Watts RMS x 2-Channels Into 4-Ohm
• Components per Enclosure: 16.5 Woofer; 5.1" x 12.7" tweeter
• Frequency Response: 55Hz-21kHz
• 120 Watts RMS x 2-Channel Into 2-Ohms

Kicker KB6000 White Outdoor Speakers & Jensen DUBa2100 480 Watt 2-Channel amplifier Note: a 12 Volt Power Source Is Needed to Power The Amplifier. KICKER KB6000 6.5" 2-WAY FULL RANGE SYSTEM The KB6000 full-range system takes the tradition and loudness into all kinds of spaces and places. Some of the world's top water-sports tower builders use them to send the tunes from the boat back to the action. It all starts with bold 6.5-inch KICKER woofers and 2 x 5-inch, compression-loaded horn tweeters firing your favorite mix wherever you want the party started. The woofers use polypropylene cones, Santoprene surrounds, and a 12 dB octave low-pass crossover with impedance compensation to get that signature KICKER BASS Type: 2-way Components per enclosure (in., cm): 6-1/2, 16.5 Woofer; 2x5, 5.1x12.7 tweet Max Rec Amp Power (watts PEAK/RMS)*: 150/75 Frequency Response (Hz): 55-21k Standard Dimensions (in.): 11W x 8-1/8H x 8-1/8D Metric Dimensions (cm.): 27.9W x 20.7H x 20.7D Impedance (ohms): 8 Sensitivity (dB 1w/1m): 90 Grilles: Yes Jensen DUBa2100 480 Watt 2 channel amplifier MOSFET Power Supply High Current Toshiba Output Transistors NJM4580 Low Noise, Low Distortion Op-Amps Optimized Class AB Design Minimizes Distortion and Reduces Idle Current Designed to Drive 4-Ohm and 2-Ohm Loads Continuously Variable Low-Pass Filter: 40 - 300Hz (12dB / Octave) Continuously Variable High-Pass Filter: 40 - 300Hz (12dB / Octave) Continuously Variable Bass EQ: 0 ~ 12 dB at 45Hz CEA Specifications: Power Output: 80 Watts RMS x 2-Channels Into 4-Ohms @ 1% THD+N Signal to Noise Ratio: 100dBA Below Reference (Reference: 1 Watt, 4-Ohms) Additional Power Output: 120 Watts RMS x 2-Channel Into 2-Ohms @ 1% THD+N 235 Watts RMS x 1-Channel (Bridged) Into 4-Ohms @ 1% THD+N Frequency Response: 10 Hz - 60 kHz, -3dB (Reference: 1 Watt)