UPC 851567004532

• UT202A, Compact size AC clamp meter, up to 600 amps, a line splitter included
• UT202A,AC/DC voltage, resistance, continuity & diode check
• Data hold + Maximum value measurement
• Carrying case included
• 30 days money back guarantee and 1 year limited warranty

Why You Need wire splitter or line separator to measure the current ? The answer is : All the clamp meter can measure current on a single wire only, if you put the two wires in the clamp jaw, the reading will be zero, Only from one wire, you get a reading. This splitter virtually splits the wire and you clamp on the splitter around one wire. The TP202A(Uni-T UT202A) is an Auto/Manual range AC clamp meter, it can be used to measure AC/DC voltage and AC current. Also you can use it to measure resistance, continuity test & diode check. For your convenience, it comes with an essential piece of accessory needed for measuring AC current, a line splitter M920, which is retailed for $15. Specifications: Display: 1999 COUNTS DCV : 200m/2/20/200 ± 0.8% 600V ± 1.0% ACV: 2/20/200 ± 1.2% 600V ± 1.5% ACA: 20A ± 2.0% 200A ± 1.5% 600A ± 2.0% Resistance: 200 ohm ± 1.2% 2K/20K/200K ohm ± 1.0% 2M ohm ± 1.2%, 20M ohm ± 1.5% Diode check Continuity test MAX. Diameter for conductor: Φ26 mm Dimensions: 194 x 72 x 35 mm Weight: APPROX. 200g (including battery) Features: Auto/manual range Data hold What's in the box: 202A clamp meter: 1 M920 line splitter: 1 Test leads: 1 pair User manual: 1 Carrying pouch: 1 9V Battery: 1 (installed) Lanyard: 1 Tekpower is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties.