UPC 855463004870

• Input Voltage:36 to 60VDC
• Output Voltage:POE-5s 5VDC@ 2.4A POE-9s 9VDC @ 1A POE-12s 12VDC @ .67A POE-24s 24VDC @ .5A
• Output Ripple:1% Max
• Data/POE IN Conn:RJ45 Socket
• Data OUT Conn:12" Cable with RJ45 Plug

Power Over Ethernet Active Splitter with Isolation 802.3af , Output 12VDC at 1A 12W. With IEEE 802.3af compatibility and advanced auto-sensing algorithm means it will accept POE power from any IEEE 802.3af router or power supply. The active POE Splitter gives "carrier class" performance in a low cost system. With its IEEE 802.3af compatibility and advanced auto-sensing algorithm it will accept POE power from any IEEE 802.3af router or power supply. The overload and short circuit protection will shut down power immediately when a short circuit is detected without any damage to the POE system. Power (36 to 60V) is expected on ethernet pins 4/5 (V+) and 7/8 (V-) as per the IEEE 802.3af standard or pins 1,2,3,6 (Cisco Standard). Using power over Ethernet to power remote devices has several advantages including: The power supply can be centrally located where it can be attached to an uninterruptible power supply. Power can be supplied over long distances, up to 300 feet. Power can be available wherever network access is available The user has the ability to easily power on reset the attached equipment from a remote location. The Active POE Splitter is used to supply power to remote equipment and devices without built in POE functionality. These devices are a good fit for the industrial market for sensing and remote video applications.