UPC 883951415754

• Replaces standard switch, automatically turns connected load ON / OFF based on motion detected
• Smart LED night light will turn on when motion is detected for easy location in the dark in vacancy mode
• Includes 3 Click-On face covers for the motion sensor light switch for perfect color match
• Modes of operation: Occupancy / Vacancy. Single pole use only. Not for 3 way wiring
• Motion sensor switch ranges 180 Degree, 700 sq. ft. coverage. 2 Year Manufacturer's Warranty

Enerlites HMOS-J In-Wall Passive Infrared Motion Sensor is the perfect cost and energy efficiency solution for both residential and commercial users, while featuring 2 in 1 Occupancy / Vacancy Sensor Mode, SMART LED Night Light and standalone click-on interchangeable face cover design. HMOS wall sensor is the ideal replacement of standard switch. With Enerlites HMOS-J, users will never have to worry about leaving their closet, bedroom, bathroom, hallway or kitchen lights on. Easily install this device without drilling - just use existing wiring. The included smart LED night light functions as a switch button locator making it easy to find in the dark. The HMOS-J is the perfect motion sensor switch for all areas including bedroom, as LED Night Light turns off while you are sleeping and will not interrupt your resting. The smart LED night light will only turn on when motion is detected, and will turn off once the sensor no longer detects motion. The Interchangeable Click-On face cover design with a total of 3 face covers (White, Light Almond, and Black) make this device easy to color match your room. < /br> Operating modes: • OCC (Occupancy) mode turns the light/fan/motor/load ON when it detects motion and will automatically turn the load OFF when no motion is detected for the pre-set time delay. • VAC (Vacancy) mode converts the switch to manual on by pressing the button, then will automatically turn the connected load OFF after no motion is detected for the pre-set time delay. Specifications: • Adjustable delay time: 15 sec. - 30 min. • 180 Degree, maximum 700 sq ft coverage • Operational Temperature: 32° - 131°F • Incandescent: 500W at 120VAC • Voltage: 120VAC, 60Hz/ 5A • Ballast: 500VA @ 120VAC • Motor: 1/8HP Ground wire required!