UPC 889284413610

• Dedicated to the audi car,Installation is simple,Directly replace the original car door lights
• No drilling, no wiring, no disassemblying, no damage to your Car. Easy to install,It will only take you about 5 minutes.
• When the door is opened, the Audi LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
• High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
• Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.

This welcome lights is positioned into the under surface of the front doors. When the door is opened, the audi logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. When you close the door, the logo light disappears.Compatibility: Audi A3 (2010 to 2016)A4 (2007 to 2017) A5 (2008 to 2017) A6 (2000 to 2017) A7 (2012 to 2017) A8 (2004 to 2017) Allroad (2003 to 2017) Q3 (2013 to 2017) Q5 (2009 to 2017) Q7 (2007 to 2017) R8 (2007 to 2017) RS4 (2004 to 2017) RS5 (2004 to 2017) RS6 (2004 to 2017) RS7 (2013 to 2017) S3/S4/S5/S6/S7/S8 (2004 to 2017) TT/TTS (2008 to 2017) Package Include: 2 pieces welcome light Package Size: 9.5 * 3.8 * 9.5 (cm) Installation Instructions: 1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights; 2. Plug In new Door Lights With Correspondent Connector; 3. Put new Door Lights To The Spot Where Your Original Step Lights Were. 4. Done! Logo Should Be Projecting On To The Ground.